Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Магазин

Возврат к шагу #1

Редактировать с помощью Noah Whited -

Правка одобрена автор Noah Whited

До
После
Без изменений

Шаг Линий

[* icon_note] Please make sure the system is completely powered off and all SD storage cards are removed before starting the removal process
[* icon_note] Please take note that there may be either one or twored] All 6.35mm screws atwere removed using a J00 Phillips head bit from the top, since it depends on the modeliFixit pro toolkit.
[* black] There are four screws on the back of the device, remove them as shown.
[* black] There are two screws on the bottom, near the charging port, remove them.
[* black] finallyFinally, remove the top screwsscrew under the dust cover.
[* icon_note] Please make sure the system is completely powered off and all SD storage cards are removed before starting the removal process
[* icon_note] Please take note that there may be either one or twored] All 6.35mm screws atwere removed using a J00 Phillips head bit from the top, since it depends on the modeliFixit pro toolkit.
[* black] There are four screws on the back of the device, remove them as shown.
[* black] There are two screws on the bottom, near the charging port, remove them.
[* black] finallyFinally, remove the top screwsscrew under the dust cover.
[* icon_note] Please store the screws in a safe place for when you put the device back together.