Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Магазин

Возврат к шагу #3

Редактировать с помощью Noah Whited -

Правка одобрена автор Daniel Woodard

До
После
Без изменений

Шаг Линий

[* icon_note] The next step will require the opening tool .
[* icon_caution] Please carefully separate the back from the front completely. '''NOTE''', you will need to completely remove the back fromdisconnect the small ribbon cable on the frontinside before completely removing the panelback. Otherwise you may end up hurting the ribbons on the inside.
[* icon_note] The orange ribbon shown inWhile separating the picture will need to be disconnected beforeback, carefully pry all the way around the back panel can be fully taken offback. You should hear popping noises while going around and this is a good sign.
[* icon_caution] Please carefully separate the back from the front completely. '''NOTE''', you will need to completely remove the back fromdisconnect the small ribbon cable on the frontinside before completely removing the panelback. Otherwise you may end up hurting the ribbons on the inside.
[* icon_note] The orange ribbon shown inWhile separating the picture will need to be disconnected beforeback, carefully pry all the way around the back panel can be fully taken offback. You should hear popping noises while going around and this is a good sign.
[* black] Upon removing the back panel you will need to slowly and carefully remove the ribbons connecting the hardware to access the needed parts to be repaired.

Изображение 2

Старая версия

Новая версия

Изображение 3

Старая версия

Новая версия