Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Магазин

Возврат к шагу #3

Редактировать с помощью Joseph Thomas -

Правка одобрена автор Joseph Thomas

До
После
Без изменений

Шаг Линий

[* icon_note] The next step will require the opening tool tool.
[* icon_note] The next step will require the opening tool tool.
[* icon_caution] Please carefully separate the back from the front completely. '''NOTE''', you will need to disconnect the small ribbon cable on the inside before completely removing the back. Otherwise you may end up hurting the ribbons on the inside.
[* icon_note] While separating the back, carefully pry all the way around the back. You shouldwill hear popping noises while going around and this is a good sign.
[* icon_note] While separating the back, carefully pry all the way around the back. You shouldwill hear popping noises while going around and this is a good sign.
[* black] Upon removing the back panel you will need to slowly and carefully remove the ribbons connecting the hardware to access the needed parts to be repaired.