Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Магазин

Возврат к шагу #3

Редактировать с помощью Daniel Woodard -

Правка одобрена автор Daniel Woodard

До
После
Без изменений

Шаг Линий

[* icon_note] The next step will require the opening tool.
[* icon_caution] Please carefully separate the back from the front completely. '''NOTE''', youYou will need to disconnect the small ribbon cable on the inside before completely removing the back. Otherwise you may end up hurting the ribbons on the inside.
[* icon_caution] Please carefully separate the back from the front completely. '''NOTE''', youYou will need to disconnect the small ribbon cable on the inside before completely removing the back. Otherwise you may end up hurting the ribbons on the inside.
[* icon_note] While separating the back, carefully pry all the way around the back. You will hear popping noises while going around and this is a good sign.
[* black] Upon removing the back panel you will need to slowly and carefully remove the ribbons connecting the hardware to access the needed parts to be repaired.