Перейти к основному содержанию

Возврат к шагу #1

Редактировать с помощью Kristen Gismondi -

Правка одобрена автор Kristen Gismondi

До
После
Без изменений

Шаг Линий

-[* icon_note] The back camera is fastened to the motherboard via a robin cable .
-[* black] So first we must remove the casing, remove the two 6.35 mm screws using a J00 Philips screw driver.
+[* icon_note] The back camera is fastened to the motherboard via a ribbon cable .
+[* red] So first we must remove the casing, remove the two 6.35 mm screws using a J00 screwdriver.
[* black] After the screws have been removed, carefully remove the black casing.