История iBook G4 12" 800 MHz-1.2 GHz Rear Display Bezel Replacement Шага #1

Возврат к шагу #1

Отредактированно Luke Soules - 23 окт 2009 г.

-	[* red] Use a ~~T6 Torx screw~~ to remove the two hex screws on either side of the display (four screws total).
-	[* icon_note] ~~These four~~ screws ~~have hex heads, but we have found the~~ T6 Torx screwdriver ~~fits perfectly~~.
+	[* red] Use a 1.5mm hex screwdriver to remove the two hex screws on either side of the display (four screws total).
+	[* icon_note] If you don't have a 1.5mm hex driver, you can probably get these screws out with a T6 Torx screwdriver. However, if you use a T6 Torx driver you'll be more likely to strip the screws.