Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Магазин

Возврат к шагу #2

Редактировать с помощью Marc Malkwitz -

Правка одобрена автор Marc Malkwitz

До
После
Без изменений

Шаг Линий

[title] Cut and position double sided tape
[* black] Cut two tiny peices(approx. 1,5 x 4 mm) pieces of double sided adhesive tape and place them on the seat
[* black] the red iscolour comes form the protective film of a very good tape by Tesa 4965, which works perfectly for this job. But principally any double sided tape, which is not too thick should do
[* black] On th seconthe second photo you see the empty seat on the left and the prepared one on the right
[* black] Cut two tiny peices(approx. 1,5 x 4 mm) pieces of double sided adhesive tape and place them on the seat
[* black] the red iscolour comes form the protective film of a very good tape by Tesa 4965, which works perfectly for this job. But principally any double sided tape, which is not too thick should do
[* black] On th seconthe second photo you see the empty seat on the left and the prepared one on the right