Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Магазин

Возврат к шагу #3

Редактировать с помощью Taylor Dixon -

Правка одобрена автор Taylor Dixon

До
После
Без изменений

Шаг Линий

[* black] Use a spudger to release the small hooks at each end of the left and right bumper.
[* black] Watch forred] After you release these hooks, be careful as you separate the small, black wirelessface plate from the back of the controller. The connect/sync button - circled in yellow on the(see second imageimage) is held in by this face plate and will come loose as you perform this step.
[* black] Watch forred] After you release these hooks, be careful as you separate the small, black wirelessface plate from the back of the controller. The connect/sync button - circled in yellow on the(see second imageimage) is held in by this face plate and will come loose as you perform this step.

Изображение 2

Старая версия

Новая версия