Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Магазин

Возврат к шагу #1

Редактировать с помощью Jeff Suovanen -

Правка одобрена автор Jeff Suovanen

До
После
Без изменений

Шаг Линий

[* black] Heaticon_note] The display is strongly glued to the iOpener tool and apply to one edgeframe of the device.
[* icon_caution] Heat gunsblack] To remove the display, first soften the adhesive by applying heat. You can use a heat pad, heat gun, or blow dryers may work but runiOpener. In a higher riskpinch, a hair dryer can also work.
[* icon_caution] Be careful when using a heat gun, as too much heat can permanently damage the display or cause the battery to explode.
[* black] Steadily and evenly heat the perimeter
of damaging the screendisplay until it's too hot to touch, and other componentstry to maintain that temperature for several minutes.
[* black] Heaticon_note] The display is strongly glued to the iOpener tool and apply to one edgeframe of the device.
[* icon_caution] Heat gunsblack] To remove the display, first soften the adhesive by applying heat. You can use a heat pad, heat gun, or blow dryers may work but runiOpener. In a higher riskpinch, a hair dryer can also work.
[* icon_caution] Be careful when using a heat gun, as too much heat can permanently damage the display or cause the battery to explode.
[* black] Steadily and evenly heat the perimeter
of damaging the screendisplay until it's too hot to touch, and other componentstry to maintain that temperature for several minutes.