Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Магазин

Возврат к шагу #2

Редактировать с помощью Jeff Suovanen -

Правка одобрена автор Jeff Suovanen

До
После
Без изменений

Шаг Линий

[* black] PryUse a suction cup or an iSclack to pull up on the glass and create a slight gap between the glass and the metal frame.
[* icon_note] If your display is badly cracked, a suction cup may not adhere. It may help to first cover
the screendisplay with a plasticlayer of packing tape. Alternatively, you can superglue your suction cup to the display.
[* black] Insert an
opening tool or a plastic opening pickpick into the gap.
[* icon_note] Attemptblack] Slide the pick around the sides and bottom of the display to begin prying fromcut the speaker slots.
[* icon_note] Multiple heating applications may be necessary
adhesive. Apply more heat as needed.
[* icon_caution] Work carefully—the glass is thin and will crack easily if you try
to effectively pry upforce it.
[* black] Separate
the screen fromtop edge last. There are antennas on both sides, so be careful not to damage them. Use more heat or a bit of isopropyl alcohol to help weaken the adhesive.
[* black] PryUse a suction cup or an iSclack to pull up on the glass and create a slight gap between the glass and the metal frame.
[* icon_note] If your display is badly cracked, a suction cup may not adhere. It may help to first cover
the screendisplay with a plasticlayer of packing tape. Alternatively, you can superglue your suction cup to the display.
[* black] Insert an
opening tool or a plastic opening pickpick into the gap.
[* icon_note] Attemptblack] Slide the pick around the sides and bottom of the display to begin prying fromcut the speaker slots.
[* icon_note] Multiple heating applications may be necessary
adhesive. Apply more heat as needed.
[* icon_caution] Work carefully—the glass is thin and will crack easily if you try
to effectively pry upforce it.
[* black] Separate
the screen fromtop edge last. There are antennas on both sides, so be careful not to damage them. Use more heat or a bit of isopropyl alcohol to help weaken the adhesive.

Изображение 1

Старая версия

Новая версия

Изображение 2

Нет предыдущего изображения

Добавлено