Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Магазин

Изменения в этом шаге

Редактировать с помощью bsmith1 -

На одобрении

До
После
Без изменений

Шаг Линий

[* icon_caution] The front bezel is still attached to the iMac by the microphone cable.
[* black] Gently lift the front bezel from its top edge off the rear case. It helps to use your thumbs to push down very gently on the corners of the display
[* black] Gently lift the front bezel from its top edge off the rear case. It helps to use your thumbs to push down very gently on the corners of the display
[* black] Once the top edge of the front bezel has cleared the rear case, rotate the front bezel toward the stand and lift it off the rear case.
[* icon_reminder] When reinstalling the front bezel, start at the lower edge and make sure it is flush with the rear case before lowering the top edge onto the iMac.