Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Магазин

Возврат к шагу #1

Редактировать с помощью Joseph -

Правка одобрена автор Joseph

До
После
Без изменений

Шаг Линий

[* red] Using a screwdriver with a J000 Phillips bit, remove the 14 [insert length] screws.
[* black] Using a plastic opening tool, pry part of the panel up starting from the sides of the battery slot.
[* orange] Use plastic tweezers to release the rest of the panel from plastic bits holding it in place and pry the panel up around the sides surrounding the fingerprint sensor and camera lens.
[* orange] Use plastic tweezers to release the rest of the panel from plastic bits holding it in place and pry the panel up around the sides surrounding the fingerprint sensor and camera lens.