Помощь
Редактирование шага 2 —

Тип шага:

Перетащите чтобы изменить порядок

The keyboard has no screws to remove.

Use a fine spudger to push all six keyboard tabs. On the first, you'll have to use a bit of prying to get under the keyboard. After that, get your fingernail under the keyboard, and pull gently as you go along the keyboard using the spudger to pop the other clips.

There is one un-pushable clip on each side of the keyboard. Don't try to push them. Instead, once you get the top of the keyboard up, pull the keyboard out of the clips.

Gently push each side of the locking connector's lock towards the screen, and then pull the now-loose keyboard cable out. Set the keyboard aside.

Gently push each side of the power button locking connector towards the screen, and then pull the cable out.

Ваш вклад лицензируется под свободной лицензией Creative Commons.