Перейти к основному содержанию
Помощь
Редактирование шага 1 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect the guide that includes this step.

Тип шага:

Перетащите чтобы изменить порядок

Make sure the device is turned off before attempting to disassemble it.

At the top portion of the memory card slot, use the small metal spudger to create separation between the back cover and the rest of the device.

The small metal spudger is only used to create separation between the back cover and the rest of the device, not to remove the back cover.

If possible, try to use a normal nylon spudger to separate the back cover, as it is much softer and less likely to mar/scratch the device.

Ваш вклад лицензируется под свободной лицензией Creative Commons.