Перейти к основному содержанию
Помощь
Редактирование шага 10 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 12 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

Use the point of a spudger to pry up and disconnect the back cover flex cable from its socket.

To re-attach press connectors like this one, carefully align and press down on one side until it clicks into place, then repeat on the other side. Do not press down on the middle. If the connector is misaligned, the pins can bend, causing permanent damage.

Ваш вклад лицензируется под свободной лицензией Creative Commons.