Перейти к основному содержанию
Редактирование шага 5 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 17 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

Disconnect the display cable by gently pulling it straight out of its connector.

Immediately close the retaining flap.

The flap must remain closed when the cable is reinserted during reassembly. Line up the cable with the gold contacts facing down, and gently slide it into the closed connector. Take care not to crimp or damage the cable. When fully inserted, the indentations on the sides should not be visible.

Ваш вклад лицензируется под свободной лицензией Creative Commons.