Перейти к основному содержанию
Помощь
Редактирование шага 1 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 2 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

Carefully peel away the audio board ribbon cable from the adhesive securing it to the lower case.

Take care not to damage the cable. If the adhesive offers a lot of resistance, first soften the adhesive by heating the lower case directly beneath with an iOpener, and try again.

Remove the audio board ribbon cable.

Ваш вклад лицензируется под свободной лицензией Creative Commons.