Перейти к основному содержанию
Редактирование шага 5 —

Тип шага:

For this step you will need your soldering iron, damp sponge, and solder.

If you have a cold joint then you will need the solder sucker, but if the joint is good, meet the wire and the solder at the location of where you want to solder.

Now use your soldering iron to melt the solder onto the wire. Let it dry for 10 sec then tug on the wire gently to see if it worked.

When you tug on it and it breaks loose, use the solder sucker to remove the old solder from the joint and re-solder it. If you tug and nothing happens you are all good.

Ваш вклад лицензируется под свободной лицензией Creative Commons.