Перейти к основному содержанию
Редактирование шага 3 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect the guide that includes this step.

Тип шага:

Перетащите чтобы изменить порядок

Use a heat gun to heat the adhesive under the battery.

Heat the battery for 1 minute then check if it is pliable. If needed, heat in intervals of 10 seconds until the battery can be removed.

Over heating the battery can cause the battery to explode. Exercise caution heating the battery.

Ваш вклад лицензируется под свободной лицензией Creative Commons.