Перейти к основному содержанию
Помощь
Редактирование шага 20 —

Notice: You are editing a prerequisite guide. Any changes you make will affect all 153 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

Slide the opening pick along the left edge of the iPad, releasing the adhesive as you go. The adhesive is thin here due to the digitizer along the whole left side. Make sure the pick is not too deep (max 1/2 inch) 10 mm to prevent damaging the digitizer.

The digitizer cable is located approximately 2" (50 mm) from the bottom of the iPad. Stop sliding the pick when you get ~2.25" (60 mm) from the bottom of the iPad.

Ваш вклад лицензируется под свободной лицензией Creative Commons.