Помощь
Редактирование шага 3 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 16 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

Allow the lower EMI shield to hang down from the display.

Remove the four 7.5 mm T10 Torx screws securing the display to the rear case.

The screws are recessed, so a thin magnetic screwdriver aids in removal. Most bit drivers are too short to reach these screws.

Ваш вклад лицензируется под свободной лицензией Creative Commons.