Перейти к основному содержанию
Помощь
Редактирование шага 2 —

Notice: You are editing a prerequisite guide. Any changes you make will affect all 4 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

Hold the controller cable at the area just before it meets the controller and slowly lift upwards to slide it out of its plastic slot and remove the circuit board.

Be careful with the wires connected to the circuit board itself as they are thin and delicate.

When reassembling the controller, make sure that the bottom plastic piece is fully inserted into its slot before replacing the circuit board.

Ваш вклад лицензируется под свободной лицензией Creative Commons.