Skip to main content
Help
Редактирование шага 13 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 22 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

Remove the following screws securing the front panel assembly cable bracket to the logic board:

Two 1.2 mm Phillips screws

One 1.6 mm Phillips screw

This screw tends to not be attracted to a magnetized screwdriver. Take care not to lose it when removing, and make sure it gets back into the right place—a magnetized screw may interfere with the compass.

Ваш вклад лицензируется под свободной лицензией Creative Commons.