Перейти к основному содержанию
Помощь
Редактирование шага 5 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect the guide that includes this step.

Тип шага:

Перетащите чтобы изменить порядок

These shots show how the rubber fan gasket should be installed during reassembly. Be sure not to install the gasket underneath the ear where the end of the heatsink is screwed down to the upper case.

Additionally, be sure the small post molded into the rubber gasket mates with the hole cut into the upper right corner of the logic board.

Ваш вклад лицензируется под свободной лицензией Creative Commons.