Помощь
Редактирование шага 5 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 3 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

Remove the 1.4 mm T5 Torx set screw from its tapped hole near the front edge of the upper case.

During reassembly, do not over-tighten the set screw, as the button will cease to click at a certain point. Adjust the set screw until the movable side of the trackpad has minimal play.

Ваш вклад лицензируется под свободной лицензией Creative Commons.