Редактирование шага 1 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 21 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

Later in this guide you will remove several recessed Phillips screws. Bit drivers are generally too large to fit in the recesses, so be sure to have a thin shafted Phillips screwdriver on hand.

First remove the AirPort antenna (the larger of the two), located near the power button.

Slightly squeeze the two retaining arms toward each other and lift the AirPort antenna off its post.

Squeezing the two posts excessively will surely break them off the internal frame. Work delicately.

During reinstallation, you will have to slightly squeeze the two posts together so they fit into the openings on the AirPort antenna board.

Ваш вклад лицензируется под свободной лицензией Creative Commons.