Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Запчасти и инструменты

Помощь
Редактирование шага 1 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 12 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

Remove four Phillips screws securing the lower display cable bracket to the logic board, of the following lengths:

Two 1.3 mm screws

Two 2.8 mm screws

Throughout this guide, keep careful track of your screws so that each one goes back where it came from during reassembly. Installing a screw in the wrong place can cause permanent damage.

Remove the bracket.

Ваш вклад лицензируется под свободной лицензией Creative Commons.