Skip to main content
Редактирование шага 4 —

Тип шага:

Перетащите чтобы изменить порядок

While holding the nuts on the bottom side of the skateboard in place with the 3/8" wrench, tighten the screws from the top side of the skateboard with a screwdriver. Tighten the screws in a diagonal pattern until the head of the screw sinks slightly into the grip tape.

Repeat steps 1 - 6 to install the second truck.

Ваш вклад лицензируется под свободной лицензией Creative Commons.