Перейти к основному содержанию
Помощь
Редактирование шага 5 —

Notice: You are editing a prerequisite guide. Any changes you make will affect all 2 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

Locate the blue headlight wire. Use a flathead screwdriver to pry up one side of the clamping teeth and pull the connector off.

Locate the green turn signal wire clamp. Use a flathead screwdriver to push in the tab on the side and pull off the connector.

Now that all connections between the car and the headlight assembly are disconnected, it is safe to remove the headlight assembly from the truck.

Ваш вклад лицензируется под свободной лицензией Creative Commons.