Skip to main content
Help
Редактирование шага 2 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 5 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

Prepare an iOpener (or grab a hair dryer or heat gun) and heat the face of the watch until it's slightly too hot to touch.

Leave the iOpener on the watch for at least a minute to fully heat the screen and soften the adhesive holding it to the case.

You may need to reheat the iOpener, or move it around on the screen as sections cool, to heat the screen enough to pry it off.

Ваш вклад лицензируется под свободной лицензией Creative Commons.