Skip to main content
Help
Редактирование шага 1 —

Тип шага:

Перетащите чтобы изменить порядок

Using your fingers or a probe, loosen the four small tabs located on the side of the faceplate sub-assembly by gently bending up the metal cover. (Two are shown in the picture while the other two are on the other side of the screen.)

Using the spudger, loosen the metal cover by prying it away from the six small plastic tabs. This can be done by gently working the spudger underneath the cover and pressing up on the cover around the tabs.

Remove the metal cover.

Ваш вклад лицензируется под свободной лицензией Creative Commons.