Перейти к основному содержанию
Редактирование шага 6 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect the guide that includes this step.

Тип шага:

Перетащите чтобы изменить порядок

Use tweezers to wiggle the ambient light sensor and lift it from its notch in the display.

If the sensor does not wiggle free after a few seconds, apply more heat and try again.

The sensor remains attached to the rest of the sensor assembly via a very thin ribbon cable. Be careful not to strain or damage the cable.

Ваш вклад лицензируется под свободной лицензией Creative Commons.