Перейти к основному содержанию
Помощь
Редактирование шага 1 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 6 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

Break the two warranty stickers by poking a screwdriver through them or peeling them off.

Remove the following twenty screws by rotating the screwdriver counterclockwise:

Eight 16.2mm Phillips #2 screws

Eight 15mm Phillips #2 screws

Four 19.1mm Phillips #2 screws

The holes containing most of the screws are deep and narrow. A screwdriver with interchangable bits will not be able to reach them.

Do not over-tighten the screws during reassembly. Over-tightened screws can crack the plastic channels holding the shell to the frame of the hoverboard.

Ваш вклад лицензируется под свободной лицензией Creative Commons.