Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Магазин

Помощь
Редактирование шага 4 —

Тип шага:

Перетащите чтобы изменить порядок

This is one of the cases in which I was able to reuse a pin that was pushed in but not broken.

When soldering to vias, note that from the rear (the area where all the pin connections are soldered to), the two pin connections on the far right and far left are ground, and don't connect down to these vias.

Make sure not to leave large lumps of protruding solder like the one here. I ended up having to slim it down, since it touched the metal housing of the connector when I put it back together.

Hopefully when you reassembly your EOS 20D, you won't be getting the "Err CF" message anymore.

Ваш вклад лицензируется под свободной лицензией Creative Commons.