Перейти к основному содержанию
Редактирование шага 3 —

Notice: You are editing a prerequisite guide. Any changes you make will affect the guide that includes this step.

Тип шага:

Перетащите чтобы изменить порядок

Disconnect the following wires connecting the circuit boards to the sensors and motors:

Disconnect the white connectors by pinching the tab and pulling up on the connectors.

Disconnect the black connectors by pulling the two sides apart.

Disconnect the green, yellow, and blue cables by pulling back the plastic shielding and pulling the ends apart.

Ваш вклад лицензируется под свободной лицензией Creative Commons.