Skip to main content
Редактирование шага 6 —

Тип шага:

Перетащите чтобы изменить порядок

Loosen and remove the two bolts located on the backside of the caliper with a 12mm socket.

Torque the two bolts to 33 ft-lbs when putting the caliper back on the mounting bracket.

Remove the caliper from the mounting bracket.

Do not allow the caliper to hang freely. This will causes stretching or internal blocking of the brake line.

TIP: Using hang wire to hang the caliper on the spring mount to keep it out of the way.

Ваш вклад лицензируется под свободной лицензией Creative Commons.