Skip to main content
Помощь
Редактирование шага 1 —

Notice: You are editing a prerequisite guide. Any changes you make will affect the guide that includes this step.

Тип шага:

Перетащите чтобы изменить порядок

Unplug the power button connector by pinching the tab on the front and pulling directly upwards.

Pull the cable through the center section of the hoverboard.

For reassembly, you will have to feed the cable back through the center section. This can be done using a rigid wire or cable.

Ваш вклад лицензируется под свободной лицензией Creative Commons.