Перейти к основному содержанию
Помощь
Редактирование шага 2 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 3 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

Using a Phillips #1 screwdriver, remove the two 14 mm screws located closest to the center of the hoverboard.

Using a Phillips #1 screwdriver, remove the four 12 mm screws located in the middle of the panel.

Using a Phillips #1 screwdriver, remove two 15 mm screws located closest to the wheel.

Ваш вклад лицензируется под свободной лицензией Creative Commons.