Skip to main content
Помощь
Редактирование шага 3 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 4 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

Use a spudger to lift up one of the small flaps on only one side of the female connector.

Pull on the wire toward the lifted side until the male connector is disconnected.

Remove the AMP Board.

Ваш вклад лицензируется под свободной лицензией Creative Commons.