Перейти к основному содержанию
Редактирование шага 10 —

Тип шага:

Перетащите чтобы изменить порядок

Using the iOpener or a similar tool, loosen the cover on the right side, by prying between the cover and the frame.

At the top of the cover (2nd picture) use the iOpener to pry up the cover to remove it from the frame.

Underneath the cover is the daughter board containing the charger port and headphone jack. Disconnect the cable attached to the daughter board.

Pry the daughter board to remove it from the frame, it is lightly glued, and can be reused in the new frame.

Repeat the steps in reverse to reassemble the phone.

Ваш вклад лицензируется под свободной лицензией Creative Commons.