Skip to main content
Помощь
Редактирование шага 3 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 2 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

Use the 10 mm socket wrench to unscrew the first of three 12 mm long 10 mm hex-head screws holding in the headlight assembly. The screw is located just to the left of the headlight assembly.

Unscrew the second screw located approximately 6 inches below the first.

Locate the third screw at the bottom left corner of the headlight assembly just behind the bumper and remove.

When re-installing the screws do not over tighten. Over tightening the screws will result in stripped threads.

Ваш вклад лицензируется под свободной лицензией Creative Commons.