Перейти к основному содержанию
Помощь
Редактирование шага 1 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect the guide that includes this step.

Тип шага:

Перетащите чтобы изменить порядок

Use a T6 Torx driver to remove the four 7.2 mm screws securing the fan:

Two screws securing the fan to the logic board

Two screws securing the fan to the exhaust vent

Rubber grommets secure these screws to the fan, so they may not come out completely. Just make sure they are fully loosened.

Ваш вклад лицензируется под свободной лицензией Creative Commons.