Перейти к основному содержанию
Помощь
Редактирование шага 2 —

Notice: You are editing a prerequisite guide. Any changes you make will affect all 4 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

Take the spudger and slide it around the perimeter of the device.

Pull gently on the edges to get the panel to pop up.

If the panel does not budge, be aware that there is adhesive on the back of the battery holding the back shut. Make sure to just move around the perimeter of the back panel until the panel is able to lift forward.

Ваш вклад лицензируется под свободной лицензией Creative Commons.