Перейти к основному содержанию
Помощь
Редактирование шага 1 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 3 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

Remove two 14 mm Phillips #2 screws.

Remove two 12 mm Phillips #2 screws.

Lift the arm off the assembly. This will reveal the tank hole as shown.

It is recommended that you clog the tank hole with a napkin or something similar in order to prevent small parts from falling into the heating element.

Ваш вклад лицензируется под свободной лицензией Creative Commons.