Перейти к основному содержанию
Помощь
Редактирование шага 7 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 3 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

Use a pair of tweezers to slide the click wheel ribbon cable out of its socket.

Before proceeding, be sure that both the click wheel ribbon cable socket and its cable are freed from the adhesive securing them to the dock connector and logic board.

Peel back the cable on both ends!

Ваш вклад лицензируется под свободной лицензией Creative Commons.