Skip to main content
Help
Редактирование шага 1 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 7 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

Peel back and remove the piece of electrical tape covering the headphone jack assembly cable connector.

Using the tip of a spudger, flip up the retaining flap on both of the ZIF connectors securing the headphone jack cable to the logic board.

Ваш вклад лицензируется под свободной лицензией Creative Commons.