Перейти к основному содержанию
Редактирование шага 3 —

Тип шага:

Перетащите чтобы изменить порядок

Note the locations of the wires and where they are attached. If you happen to dislodge the wires during removal you will be able to re-attach them upon re-installation.

Locate and remove the four anchoring 12mm long #2 Phillips screws for the head unit using the #2 screwdriver.

It is now safe to pull out the head unit. Support it in one hand to reduce tension in the cables.

Ваш вклад лицензируется под свободной лицензией Creative Commons.