Перейти к основному содержанию
Помощь
Редактирование шага 5 —

Тип шага:

Перетащите чтобы изменить порядок

The speakers are accessible from the outset, but the process is no fun:

Peel up the copper tape soldered to the antenna assembly.

Peel up the tape attaching both sets of wires to the rear case.

Disconnect all the connectors (the antenna interconnect cables are nicely labeled).

Carefully pry the speakers off the adhesive holding them to the rear case, and similarly pry to detach the antenna portion of the assembly.

Both speakers are on the same assembly, increasing repair costs.

In the event of antenna assembly replacement, the copper would likely need to be ripped off of the old unit and adhered to the new unit, without damage, in order to maintain the same shielding abilities.

Ваш вклад лицензируется под свободной лицензией Creative Commons.