Помощь
Редактирование шага 1 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 9 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

Pull the hard drive away from the front edge of the mini and remove it from the outer case.

During reassembly, there are two pins on the inside edge of the hard drive that fit into the case. The holes have rubber grommets around them, so it may be difficult to tell when you have seated the hard drive correctly.

There are two pairs of holes in the case. Insert the pins into the holes closest to the bottom of the case.

Ваш вклад лицензируется под свободной лицензией Creative Commons.