Skip to main content
Help
Редактирование шага 2 —

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 3 guides that include this step.

Тип шага:

Перетащите чтобы изменить порядок

The bracket is lightly adhered in place.

Gently lift to unstick and remove the bracket, being careful not to bend it.

If necessary, apply a little heat with a hair dryer or heat gun to soften the adhesive. (Putting an iOpener on the bracket is not recommended, as this may bend the spring contacts along the top.)

Ваш вклад лицензируется под свободной лицензией Creative Commons.